Sensitivity and noise in THz electro-optic upconversion radiometers.

This paper presents a study of noise in room-temperature THz radiometers that use THz-to-optical upconversion followed by optical detection of thermal radiation. Despite some undesired upconverted thermal noise, no noise is intrinsically introduced by efficient electro-optic modulation via a sum-frequency-generation process in high quality factor (Q) whispering-gallery mode (WGM) resonators. However, coherent and incoherent optical detection results in fundamentally different noise characteristics. The analysis shows that the upconversion receiver is quantum limited like conventional amplifiers and mixers, only when optical homodyne or heterodyne detection is performed. However, this type of receiver shows advantages as a THz photon counter, where counting is in the optical domain. Theoretical predictions show that upconversion-based room-temperature receivers can outperform state-of-the-art cooled and room-temperature THz receivers based on low-noise amplifiers and mixers, provided that a photon conversion efficiency greater than 1% is realized. Although the detection bandwidth is naturally narrow due to the highly resonant electro-optic modulator, it is not fundamentally limited and can be broadened by engineering selective optical coupling mechanisms to the resonator.

Terahertz vibrational signature of bacterial spores arising from nanostructure decorated endospore surface.

This theoretical effort is the first to explore the possible hypothesis that terahertz optical activity of Bacillus spores arises from normal vibrational modes of spore coat subcomponents in the terahertz frequency range. Bacterial strains like Bacillus and Clostridium form spores with a hardened coating made of peptidoglycan to protect its genetic material in harsh conditions. In recent years, electron microscopy and atomic force microscopy has revealed that bacterial spore surfaces are decorated with nanocylinders and honeycomb nanostructures. In this article, a simple elastic continuum model is used to describe the vibration of these nanocylinders mainly in Bacillus subtilis, which also leads to the conclusion that the terahertz signature of these spores arises from the vibration of these nanostructures. Three vibrating modes: radial/longitudinal, torsional and flexural, have been identified and discussed for the nanocylinders. The effect of bound water, which shifts the vibration frequency, is also discussed. The peptidoglycan molecule consists of polar and charged amino acids; hence, the sporal surface local vibrations interact strongly with the terahertz radiation.

Near-UV electroluminescence in unipolar-doped, bipolar-tunneling GaN/AlN heterostructures.

Cross-gap light emission is reported in n-type unipolar GaN/AlN double-barrier heterostructure diodes at room temperature. Three different designs were grown on semi-insulating bulk GaN substrates using molecular beam epitaxy (MBE). All samples displayed a single electroluminescent spectral peak at 360 nm with full-width at half-maximum (FWHM) values no greater than 16 nm and an external quantum efficiency (EQE) of ≈0.0074% at 18.8 mA. In contrast to traditional GaN light emitters, p-type doping and p-contacts are completely avoided, and instead, holes are created in the GaN on the emitter side of the tunneling structure by direct interband (that is, Zener) tunneling from the valence band to the conduction band on the collector side. The Zener tunneling is enhanced by the high electric fields (~5 × 106 V cm-1) created by the notably large polarization-induced sheet charge at the interfaces between the AlN and GaN.

Broadband impedance match to two-dimensional materials in the terahertz domain.

The coupling of an electromagnetic plane wave to a thin conductor depends on the sheet conductance of the material: a poor conductor interacts weakly with the incoming light, allowing the majority of the radiation to pass; a good conductor also does not absorb, reflecting the wave almost entirely. For suspended films, the transition from transmitter to reflector occurs when the sheet resistance is approximately the characteristic impedance of free space (Z 0 = 377 Ω). Near this point, the interaction is maximized, and the conductor absorbs strongly. Here we show that monolayer graphene, a tunable conductor, can be electrically modified to reach this transition, thereby achieving the maximum absorptive coupling across a broad range of frequencies in terahertz (THz) band. This property to be transparent or absorbing of an electromagnetic wave based on tunable electronic properties (rather than geometric structure) is expected to have numerous applications in mm wave and THz components and systems.

High extinction ratio terahertz wire-grid polarizers with connecting bridges on quartz substrates.

A terahertz (THz) wire-grid polarizer with metallic bridges on a quartz substrate was simulated, fabricated, and tested. The device functions as a wide-band polarizer to incident THz radiation. In addition, the metallic bridges permit the device to function as a transparent electrode when a DC bias is applied to it. Three design variations of the polarizer with bridges and a polarizer without bridges were studied. Results show the devices with bridges have average s-polarization transmittance of less than -3 dB and average extinction ratios of approximately 40 dB across a frequency range of 220-990 GHz and thus are comparable to a polarizer without bridges.

THz and mm-Wave Sensing of Corneal Tissue Water Content: Electromagnetic Modeling and Analysis.

Terahertz (THz) spectral properties of human cornea are explored as a function of central corneal thickness (CCT) and corneal water content, and the clinical utility of THz-based corneal water content sensing is discussed. Three candidate corneal tissue water content (CTWC) perturbations, based on corneal physiology, are investigated that affect the axial water distribution and total thickness. The THz frequency reflectivity properties of the three CTWC perturbations were simulated and explored with varying system center frequency and bandwidths (Q-factors). The modeling showed that at effective optical path lengths on the order of a wavelength the cornea presents a lossy etalon bordered by air at the anterior and the aqueous humor at the posterior. The simulated standing wave peak-to-valley ratio is pronounced at lower frequencies and its effect on acquired data can be modulated by adjusting the bandwidth of the sensing system. These observations are supported with experimental spectroscopic data. The results suggest that a priori knowledge of corneal thickness can be utilized for accurate assessments of corneal tissue water content. The physiologic variation of corneal thickness with respect to the wavelengths spanned by the THz band is extremely limited compared to all other structures in the body making CTWC sensing unique amongst all proposed applications of THz medical imaging.

THz and mm-Wave Sensing of Corneal Tissue Water Content: In Vivo Sensing and Imaging Results.

A pulsed terahertz (THz) imaging system and millimeter-wave reflectometer were used to acquire images and point measurements, respectively, of five rabbit cornea in vivo. These imaging results are the first ever produced of in vivo cornea. A modified version of a standard protocol using a gentle stream of air and a Mylar window was employed to slightly dehydrate healthy cornea. The sensor data and companion central corneal thickness (CCT) measurements were acquired every 10-15 min over the course of two hours using ultrasound pachymmetry.. Statistically significant positive correlations were established between CCT measurements and millimeter wave reflectivity. Local shifts in reflectivity contrast were observed in the THz imagery; however, the THz reflectivity did not display a significant correlation with thickness in the region probed by the 100 GHz and CCT measurements. This is explained in part by a thickness sensitivity at least 10× higher in the mm-wave than the THz systems. Stratified media and effective media modeling suggest that the protocol perturbed the thickness and not the corneal tissue water content (CTWC). To further explore possible etalon effects, an additional rabbit was euthanized and millimeter wave measurements were obtained during death induced edema. These observations represent the first time that the uncoupled sensing of CTWC and CCT have been achieved in vivo.

AC conductivity parameters of graphene derived from THz etalon transmittance.

THz frequency-domain transmittance measurements were carried out on chemical-vapor-deposited (CVD) graphene films transferred to high-resistivity silicon substrates, and packaged as back-gated graphene field effect transistors (G-FETs). The graphene AC conductivity σ(ω), both real and imaginary parts, is determined between 0.2 and 1.2 THz from the transmittance using the transmission matrix method and curve-fitting techniques. Critical parameters such as the charge-impurity scattering width and chemical potential are calculated. It is found that not only the sheet charge density but also the scattering parameter can be modified by the back-gate voltage.

Tunable millimeter and sub-millimeter spectral response of textile metamaterial via resonant states.

We report on a new textile metamaterial created by adding metal wires directly into the polymer yarn. Split-ring resonator-like extended states are created. Simulations revealed that the extended states can be easily tuned via the geometry. Measurements of the transmittance spectrum as a function of the polarization angle in the low terahertz range were also performed and these peaks were ascribed to a polarization-dependent resonator model. The fabrics are viable candidates for flexible and deformable gigahertz and terahertz-enabled metamaterials.

Narrow terahertz attenuation signatures in Bacillus thuringiensis.

Terahertz absorption signatures from culture-cultivated Bacillus thuringiensis were measured with a THz photomixing spectrometer operating from 400 to 1200 GHz. We observe two distinct signatures centered at ∼955 and 1015 GHz, and attribute them to the optically coupled particle vibrational resonance (surface phonon-polariton) of Bacillus spores. This demonstrates the potential of the THz attenuation signatures as "fingerprints" for label-free biomolecular detection.

Terahertz sensing in corneal tissues.

This work introduces the potential application of terahertz (THz) sensing to the field of ophthalmology, where it is uniquely suited due to its nonionizing photon energy and high sensitivity to water content. Reflective THz imaging and spectrometry data are reported on ex-vivo porcine corneas prepared with uniform water concentrations using polyethylene glycol (PEG) solutions. At 79% water concentration by mass, the measured reflectivity of the cornea was 20.4%, 14.7%, 11.7%, 9.6%, and 7.4% at 0.2, 0.4, 0.6, 0.8, and 1 THz, respectively. Comparison of nine corneas hydrated from 79.1% to 91.5% concentration by mass demonstrated an approximately linear relationship between THz reflectivity and water concentration, with a monotonically decreasing slope as the frequency increases. The THz-corneal tissue interaction is simulated with a Bruggeman model with excellent agreement. THz applications to corneal dystrophy, graft rejection, and refractive surgery are examined from the context of these measurements.

Second-order bandpass terahertz filter achieved by multilayer complementary metamaterial structures.

We propose a multilayer complementary metamaterial structure fabricated on a crystal quartz substrate measuring between 100 and 700 GHz. The concept of a second-order terahertz bandpass filter is realized by this structure, and it offers a superior quality factor, steepness of skirts, and out-of-band rejection. Physical limitations on the quality factor and insertion loss have also been studied, including the skin depth of the metal and the optical phonon resonance in quartz. Based on these factors, a series of higher frequency filters has been designed, and simulation results are presented.

Terahertz imaging of biological tissues.

A reflective THz imaging system sensitive to small variations in water concentrations has been developed. Biological tissues such as skin, eyes and teeth were imaged to ascertain the systems response to tissue hydration. Difference in water concentrations translated to contrast in the THz images. Contrast was also seen in THz images of skin cancer and burns suggesting the potential diagnostic capability of THz imaging system in clinical settings. All specimens analyzed were freshly excised ex-vivo tissues. These encouraging preliminary results have motivated us to explore the in vivo potential of our imaging system.

THz Medical Imaging: in vivo Hydration Sensing.

The application of THz to medical imaging is experiencing a surge in both interest and federal funding. A brief overview of the field is provided along with promising and emerging applications and ongoing research. THz imaging phenomenology is discussed and tradeoffs are identified. A THz medical imaging system, operating at ~525 GHz center frequency with ~125 GHz of response normalized bandwidth is introduced and details regarding principles of operation are provided. Two promising medical applications of THz imaging are presented: skin burns and cornea. For burns, images of second degree, partial thickness burns were obtained in rat models in vivo over an 8 hour period. These images clearly show the formation and progression of edema in and around the burn wound area. For cornea, experimental data measuring the hydration of ex vivo porcine cornea under drying is presented demonstrating utility in ophthalmologic applications.

Terahertz sensing of corneal hydration.

An indicator of ocular health is the hydrodyanmics of the cornea. Many corneal disorders deteriorate sight as they upset the normal hydrodynamics of the cornea. The mechanisms include the loss of endothelial pump function of corneal dystophies, swelling and immune response of corneal graft rejection, and inflammation and edema, which accompany trauma, burn, and irritation events. Due to high sensitivity to changes of water content in materials, a reflective terahertz (300 GHz and 3 THz) imaging system could be an ideal tool to measure the hydration level of the cornea. This paper presents the application of THz technology to visualize the hydration content across ex vivo porcine corneas. The corneas, with a thickness variation from 470 - 940 µm, were successfully imaged using a reflective pulsed THz imaging system, with a maximum SNR of 50 dB. To our knowledge, no prior studies have reported on the use of THz in measuring hydration in corneal tissues or other ocular tissues. These preliminary findings indicate that THz can be used to accurately sense hydration levels in the cornea using a pulsed, reflective THz imaging system.

Towards medical terahertz sensing of skin hydration.

Terahertz imaging has shown promise as a tool for noninvasive in-vivo detection of skin abnormalities, including skin cancer, burns, scars, and wounds due to its low non-ionizing photon energy and ability to penetrate clothing and gauze. This study examines whether low-level bulk differences in the water content between hyperhydrated and dehydrated skin can be detected using a scanning, reflective THz imaging system. Our results show an 8.7 x difference in the THz reflectivity between hyperhydrated and dehydrated specimens of chicken skin. The results provide further evidence that water concentration is the primary contrast mechanism in reflective THz biomedical imaging.

Tissue mimicking materials for dental ultrasound.

While acoustic tissue mimicking materials have been explored for a variety of soft and hard biological tissues, no dental hard tissue mimicking materials have been characterized. Tooth phantoms are necessary to better understand acoustic phenomenology within the tooth environment and to accelerate the advancement of dental ultrasound imaging systems. In this study, soda lime glass and dental composite were explored as surrogates for human enamel and dentin, respectively, in terms of compressional velocity, attenuation, and acoustic impedance. The results suggest that a tooth phantom consisting of glass and composite can effectively mimic the acoustic behavior of a natural human tooth.

A flexible, conformal ultrasound array for medical imaging.

An ultrasound imaging system is under development that features a flexible transducer that can be wrapped conformally around curved surfaces of the body. The device is intended to deliver high image quality without the need for mechanical scanning, and will benefit medical personnel with limited ultrasound training. A 2 x 8 element piezoelectric transducer prototype and 15.5 MHz imaging system have been built, and the system concept has been demonstrated by imaging a soft tissue phantom. The transducer design, imaging procedure, and preliminary image processing techniques are presented.

Towards THz medical imaging; reflective imaging of animal tissues.

A reflective THz imaging system has been developed, and features a photoconductive switch and zero-bias Schottky diode detector. The system was used to image deli meats and can distinguish between muscle and adipose tissue based on water content. This capability is a step towards the development of THz medical imaging systems.

Ultrasound detection of submerged dental implants through soft tissue in a porcine model.

STATEMENT OF PROBLEM: Current methods of measuring soft tissue thickness over potential dental implant sites and locating submerged implants may be imprecise or invasive. PURPOSE: The purpose of this study was to develop and demonstrate proof of the concept of a customized ultrasound imaging system in locating and measuring the depth of implants submerged beneath soft tissue. MATERIAL AND METHODS: A complete ultrasound system, including a customized soft tissue-matched transducer, transceiver, and digital signal processing algorithms, was created for the specific application of detecting dental implants anchored in bone beneath soft tissue. The system was used to locate implants placed in cancellous bone and measure overlying soft tissue depth in a porcine model. Ten measurements were made on each porcine model by manually moving the transducer laterally over the soft tissue surface. Data were analyzed with descriptive statistics. RESULTS: The mean signal-to-noise ratio, SNR (standard deviation), from the bone surfaces, was 19.1 (4.6) dB, and the mean SNR from the implant surfaces was 36.6 (2.2) dB, resulting in a mean difference of 17.5 dB, or x56.2, in average signal power between the bone and implant surfaces. Consequently, implants were easily and accurately (+/-0.2 mm) located beneath at least 5 mm of soft tissue. Likewise, soft tissue depths over bone and implants were accurately measured and were within the corresponding caliper tissue measurement error (+/-0.5 mm). CONCLUSIONS: The specialized ultrasound imaging system located and measured the depth of implants placed in bone submerged beneath soft tissue in a porcine model.